9 Easy Ways to Get Your Logitech Keyboard Working Again

Your keyboard’s not working... how do you fix it?

Co-authored by Darlene Antonelli, MA Reviewed by Luigi Oppido

Last Updated: February 8, 2026 Fact Checked

Is your Logitech keyboard not working, not connecting to Bluetooth, or not typing? Fortunately, you can try diagnosing and troubleshooting this issue quickly on your own before paying someone else to fix it. This wikiHow article lists steps to troubleshoot a Logitech keyboard when it isn't working and fix it!

What to Do If Your Logitech Keyboard Is Not Working

Make sure you have correctly installed working batteries in your keyboard. Plug the USB receiver into a different port on your computer. Update your keyboard with the Logi Options+ software and update your drivers. Resync your keyboard, test it with other devices, and re-pair Bluetooth connections.

1

Check the batteries.

Download Article

Your keyboard can be unresponsive if the batteries are low or dead. The fix to your problem can be as simple as using new batteries in your keyboard.
- Also, make sure that you're putting the batteries in the correct position. You should see a diagram of how to position the batteries on the back or front of the battery cover.^{[1]
  X
  Research source}
- Since this only applies to wireless keyboards, skip this step if you're using a wired one.

2

Make sure the switch is on.

Download Article

Some on/off switches are hidden and a powered-off keyboard will appear not to work. Look on your keyboard's top, sides, and back for an on/off switch, and make sure it's switched on (you should see green).^{[2]
X
Research source}
- A switch that's off shows red.

3

Resync the keyboard if it's wireless.

Download Article

This glitch can prevent your presses on the keyboard from showing up on your computer. Simply unplug the USB receiver from your computer, wait a few seconds, then plug it back into a different USB port.^{[3]
X
Research source}

4

Update the Logitech software if you have Logi Options+.

Download Article

Out-of-date software can contain bugs and glitches that prevent software from working properly. To update the software, open it on your computer (or download it from the Logitech website), and click Install & Update or click the gear icon and Check for updates.^{[4]
X
Research source}
- Not every Logitech keyboard will have the ability to use Logi Options+. If you're not sure, look up your keyboard model online to see if it can use the software. You can also scroll down to the "Keyboards" chart at this Logitech link to see if your keyboard is supported.
- Note that this software used to be known as the Logitech Unifying Software and Logitech Options. It has since been updated to Logi Options+.
- If your keyboard does not use Logi Options+, skip this step.

5

Update drivers.

Download Article

Out-of-date drivers have bugs, glitches, and compatibility issues that cause them not to work. Usually, your drivers update automatically whenever you perform a system update through Windows Update or update your macOS. You can, however, update your drivers without updating your system.
- Go to your device manager on Windows and right-click the keyboard entry to update your drivers.
- If you're on Mac, you won't be able to update the drivers individually, so see if there's a software update that you can install.^{[5]
  X
  Research source}

6

Resync your keyboard.

Download Article

The current session can have a glitch that prevents your keyboard from working. To do this, turn off your keyboard. You can usually find the power switch on the top front, side, or back of your keyboard. Also, remove the wireless dongle from your computer. Remove the batteries and place them in correctly (or replace them if you think they are old).
- If you're also using a wireless mouse, turn it off as well, then wait for a few seconds.
- Finally, after a few seconds, turn the keyboard back on, plug the wireless receiver back in, and see if your issue is fixed.

7

Test the keyboard with another device.

Download Article

The issue can be caused by damaged hardware. If the keyboard doesn't work with other devices, like other computers, laptops, or iPads, you can safely assume that there might be hardware damage causing the problem and can stop troubleshooting to seek help from a repair shop or buy a new keyboard.
- However, if the keyboard works, you know to keep troubleshooting on the original device to get your keyboard working again.

8

Re-pair Bluetooth keyboards.

Download Article

The current Bluetooth connection can be glitched, preventing your keyboard from working. You need to forget the initial pairing and pair again. To forget the pairing, open your computer's Bluetooth settings (in Settings on Windows and in System Settings on Mac) and click Forget or Remove Device next to the keyboard.
- Turn your keyboard off for a few seconds, then turn it back on and put it in pairing mode. Make sure Bluetooth is turned on from your computer, and click the keyboard in the Bluetooth devices section to pair them.
- You can also use a Logitech mouse on PC or Mac.

9

Remove obstructions.

Download Article

Other electronics can be interrupting the signal, making your keyboard not work. Move other electronic devices, like your cell phone, away from your keyboard and the receiver to see if that works.
- Your keyboard will stop working if it's too far from the receiver as well, so make sure they are close together.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Check out How to Repair a Laptop Key if the issue is one key instead of the entire keyboard.

Thanks
Helpful 1 Not Helpful 0
Use the following wikiHow article to fix a keyboard that is typing the wrong characters when you press a key. It can be a jammed or have a stuck key.

Thanks
Helpful 0 Not Helpful 0